• 词曲统观视角下明代词曲互动研究 2019-10-28
  • 诊疗城市土壤 上海研发“配生土”修复绿色生态 2019-10-28
  • 评赵若凡诗集《前路缤纷》:打量自我与认知世界 2019-10-28
  • 登高赏秋景、饮菊花酒……寒露习俗有哪些 2019-10-26
  • 登陆顶级国际车展 红旗品牌赢取高光时刻 2019-10-26
  • 登封宣传部--河南频道--人民网 2019-10-26
  • 登上国际舞台的恒洁卫浴在“智造浪潮”中踏浪前行 2019-10-26
  • 村干部借款不还 村民一筹莫展 2019-10-25
  • 村医邓前堆:月亮照亮行医路 2019-10-25
  • 广东进一步加强旅游住宿业行业监管 2019-10-23
  • 广东肇庆大力推广传唱优秀童谣 用童声歌颂美好新时代 2019-10-23
  • 广东职业技术学院“沉浸式”教育推动主题教育扎实推进 2019-10-23
  • 哈尔滨市交警联合多部门开展秋冬季哈同高速公路恶劣天气应急演练 2019-10-22
  • 哈尔滨市“龙威2019-1”森林扑灭火实兵拉动演练--黑龙江频道--人民网 2019-10-22
  • 哈尔滨市“就业扶贫行动日”专场招聘会举办 为农村贫困劳动者送岗位、送服务 2019-10-22
  • Stock code:603089
    Alternate Text

    After the installation, the new product makes a clacking sound during the driving state.

    Reason:

    1 Installation problems

    It might be caused by looseness of the locknut and the bolt on the upper part.

    2 Wrong installation sequence

    If it is not installed following the installation numbers, it will cause abnormal sounds.

    Countermeasure:

    1 Tighten the locknut according to the torque mentioned in the Installation Instruction Manual and the installation status (installation sequence, directions, falloff, etc.) of each component and looseness of the lockcnut. (Tightened in 1G state)

    2 If there are any damage of the outer tube or any sign of contact with vehicle body, it might be the installation sequence problem. Install the product by following the correct installation sequence.

    Attention:

    Even the installation is correct, the abnormal sound might happen caused by the contact between the product and the vehicle body due to the wrong stock and dimension size of the product.

    Even if there is no abnormal sound at the initial stage of installation, the looseness of the mounting portion after a certain time of running might cause abnormal sound. Moreover, incomplete installation (the some parts are missing, incorrect installation etc.) of the bracket components might cause abnormal sound.

    The upper bracket, coil spring, and the shock absorber altogether determine the mounting direction. Please unify the directions of these parts. In particular, please pay attention not to cause a deviation between the front end of the spiral portion of the original coil spring and the hole of the coil spring washer.

    After the installation, the new product makes a clacking / squeaking sound during the driving state.

    Reason:

    1 Clacking sound

    Sometimes it is the sound of the internal valve action. Pay particular attention to this in quiet vehicles.

    2 Squeaking sound

    It is the sound of oil passing through the valve. The noise can be lower if it is filled with gas.

    Countermeasure:

    1.2.The sound is caused by the movement of the shock absorber, not the product failure.

    Attention:

    The clucking/squeaking sound is caused by the movement of the shock absorber, and it happens on the new installed products. It is not a performance problem.

    No damping force during stretching (twin-tube shock absorber before installation)

    Countermeasure:

    Air is mixed into the inner tube when product is placed horizontally. Please move the piston rod several times after placing it in the vertical position.

    The oil seeps out from the upper oil seal of the shock absorber, and once the shock absorber moves, the drop of oil is getting worse.

    Reason:

    The sealing property is lost due to oil seal damage caused by the damage of the piston rod.

    Countermeasure:

    Replace the damaged parts with new ones.

    Attention:

    The thin layer of grease attached to the piston rod remains during production. Before the confirmation of the oil leaking, pls wipe the grease off and let the piston rod move several times.

    After the installation, the new product makes a clacking sound during the driving state.

    Reason:

    1 During the installation of the locknut and the stud bolts, the torque exceeds the specified torque. In addition, if abnormal sound occurs due to insufficient tightening torque, the stud bolts can be damaged if the part continues to be used.

    2 When using the upper bracket other than the original or provided by the original manufacture, the bolts may be damaged.

    3 If the bolt is over tightened or the tightening torque is insufficient, the parts may be damaged or bent. Or, if the washer is installed in the reverse direction, the mounting part of the eye ring may be damaged.

    4 Mishandling Installation sequence may cause bending/damage.

    Countermeasure:

    Replace with the new parts. (Do not use the wrench when tightening, and strictly follow the torque specified for each part.)

    Attention:

    If the tightening torque is not strictly followed, or the malfunction caused by using the upper bracket parts other than the original ones, it is not our responsibility. Pls understand that.

    Alternate TextAbout Company

    Organization

    Corporation Profile

    Development

    Culture

    Alternate TextOthers

    Products

    Investor

    Solution

    Dynamics

    亚美娱乐优惠多一点

    Job

    Alternate TextContact us

    Addr:No.38-88 Shuanggang Road, Yuhuan City, Zhejiang Province

    Tel:0086-576-87278888

    Fax:0086-576-87278889

    Email:sales@www.dgpcdz.cn

    Alternate Text